how to reset passlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100675
Printed Date: July 09, 2025 at 7:34 PM

Topic: how to reset passlock

Posted By: opj38
Subject: how to reset passlock
Date Posted: January 02, 2008 at 7:47 AM

Does anybody know how to reset the passlock 2 . car wont turn over.

Replies:

Posted By: KarTuneMan
Date Posted: January 02, 2008 at 8:24 AM

turn the key to run....leave it for about 10 min.

Why did it all of a sudden quit working? Are you attempting a remote start?

You might want to give a little more info here.

Look here for some more info.

-------------

Posted By: opj38
Date Posted: January 02, 2008 at 9:26 AM

yes trying to install remote, was checking the resistence value to bypass and started the car by mistake. 2006 saturn Ion. passlock 2 next generaton.

Posted By: tedmond
Date Posted: January 02, 2008 at 10:01 AM

your suppose to start then cut and measure the resistance

RESET

turn key to run

open driver door and leave it open

come back in 10 min and the light will be gone, try to start with key, if it doesn towrk, leave it for another 10.

Posted By: opj38
Date Posted: January 02, 2008 at 10:09 AM

Thanks for the reply, will give it a try.

Posted By: opj38
Date Posted: January 02, 2008 at 11:53 AM

tedmond wrote:

your suppose to start then cut and measure the resistance

RESET

turn key to run

open driver door and leave it open

come back in 10 min and the light will be gone, try to start with key, if it doesn towrk, leave it for another 10.

i ve noticed that when key turns to start position all lights shut off it wont even crank.
when key turns to start position security light comes for a while then goes
thanks for all helping me

Posted By: opj38
Date Posted: January 02, 2008 at 2:07 PM

thanks aal the guys in this forum
finaally find the problem 2 amp fuse [ign fuse]was blown in fuse box located drivers side panel
changed fuse it starts rightway

Print Page | Close Window