2002 gmc 2500
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100770
Printed Date: July 15, 2025 at 3:21 AM
Topic: 2002 gmc 2500
Posted By: brakisshuro
Subject: 2002 gmc 2500
Date Posted: January 04, 2008 at 11:30 PM
I have put in a compustar 4200 and a fortin int-sl. There is only two wires on the bypass to connect, which I have done. I am not getting the bypass to learn the code. I follow the instructions but I am not getting the confrimation from it. I unhooked it and tried a ads module programmed for gm and same thing, will not learn the code. Any ideas?
Replies:
Posted By: 519civiconair
Date Posted: January 05, 2008 at 7:04 AM
Are you sure you have the right data-bus wire? If so is the unit entering programming mode or?? need more info....
-------------
F.B.S.S air ride is the only way to roll
Posted By: brakisshuro
Date Posted: January 05, 2008 at 8:04 AM
yes I have pin 2, and it is entering programming mode and then it is dropping out when I try to learn the key, or gives me a a red light meaning it is not programmed correctly
Posted By: 519civiconair
Date Posted: January 05, 2008 at 8:19 AM
Do you have the keysense wire hooked up?
-------------
F.B.S.S air ride is the only way to roll
Posted By: 519civiconair
Date Posted: January 05, 2008 at 8:48 AM
sorry wrong post...... ok what are you doing to get into programming mode? is it all Unplugged press and hold prog. button plug in conn.1 LED turns on? then conn.2 (careful not to reverse) turn key to ign. LED flashes rapidly? release prog. button and start truck and the LED stays ON????
-------------
F.B.S.S air ride is the only way to roll
Posted By: brakisshuro
Date Posted: January 05, 2008 at 9:28 AM
no it was flashing and turning off before I could start the truck. Anyways I figured out, I swapped out my module with a ads-dl and programmed it with just te tb function, and first time programmed up. thank you for your guys help.
Posted By: moonliter
Date Posted: January 05, 2008 at 11:45 AM
int-sl is only compatible for gmc model year 03 and up. unless it is sonama or a 02 envoy.
Posted By: brakisshuro
Date Posted: January 06, 2008 at 12:21 AM
in the manual and on their website it lists it as a active module for 98 and up
Posted By: moonliter
Date Posted: January 06, 2008 at 10:09 PM
It is kind of waste just to use it to bypass passlock only. It couldn't do doorlock, arm/disarm and parklights etc. etc....on your model year. You could get a passlock-sl2 instead for half the price, IMO.
|