additional remote viper 5500
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100815
Printed Date: July 12, 2025 at 6:35 AM
Topic: additional remote viper 5500
Posted By: epbog
Subject: additional remote viper 5500
Date Posted: January 06, 2008 at 12:22 AM
I just had a viper 5500 installed in my 2000 Expedition. The installer told me that I could only add a second remote that is a basic 4 button remote. I would like to add another 2-way remote like the one that came with the system. Has anyone done this to know if it is possible? The replacement remotes are available for a resonable price online, but they are all advertised as repalcements, not add-ons. Also, I need to know where to find the instructions to add another transmitter. Can anybody help me?
-------------
EBOG
Replies:
Posted By: tedmond
Date Posted: January 06, 2008 at 1:23 AM
downloads sectionshould have it. as for transmitters, vipers are capable to taking up to 4 remotes. add two 2-way remotes might cause them to conflict with one another.
Posted By: epbog
Date Posted: January 06, 2008 at 4:08 PM
I looked in the download section, and didn't see anything for the 5500. Which manual should I follow for the programming. Also, the ones that I looked at showed how to go through the button learning routines. Do I need to do that for each button, or is there a way to learn the entire remote without configuring each button? ------------- EBOG
Posted By: StealthEs
Date Posted: January 06, 2008 at 4:12 PM
Programming is easy. Open a door, turn ignition on, press the valet twice holding it down on the 2nd press, you'll hear a confirmation beep from the siren, press the lock button on the remote, you'll hear another beep from the siren and your all set.
-------------
Cris
Posted By: tedmond
Date Posted: January 06, 2008 at 5:34 PM
no need to program each remote. the unit defaults as auto program learn.
|