python 5200, add dei tilt/motion?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100845
Printed Date: July 19, 2025 at 3:13 AM
Topic: python 5200, add dei tilt/motion?
Posted By: pendulum
Subject: python 5200, add dei tilt/motion?
Date Posted: January 06, 2008 at 6:56 PM
I just bought a used Civic and it has an old school Python 5200 in it. I located the shock sensor, which is a Directed unit. How do I remove my shock sensor and replace it with the motion and tilt sensors? Also, I have the new style of tilt sensor, with the wire loops not DIPs. It's mounted to bare metal under my center console. Am I going to be falsing a lot? Thank you!
-------------
1999 Toyota Camry
--
Pioneer DEH-P3700MP
Lightning Audio Strike S4.15.VC2
Lightning Audio Strike S4.500.1
Majestic 6.5"
Replies:
Posted By: pendulum
Date Posted: January 07, 2008 at 10:44 AM
Anyone know? I'm sure some of you experienced guys have done this alarm before.
My problem is this-
The shock sensor has a red, black, orange, blue, and green wire.
Motion sensor is red, black, blue, green.
tilt is red, orange, blue.
How do I connect atleast the motion and tilts? Shock sensor I could live without, as long as my radar is working.
-------------
1999 Toyota Camry
--
Pioneer DEH-P3700MP
Lightning Audio Strike S4.15.VC2
Lightning Audio Strike S4.500.1
Majestic 6.5"
|