xk532 bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100995
Printed Date: May 14, 2024 at 7:20 AM

Topic: xk532 bypass

Posted By: stroker@techie
Subject: xk532 bypass
Date Posted: January 09, 2008 at 11:30 PM

putting a valet 561r remote start in a 2005 Chrysler 300 using directed elec. xk532 upgradeable door look interface and bypass that has 1lock input and 1unlock input and also 1 starter/accessory output wire. If I am using this do I still have to use resistors and relays? And where do I find resistors? Also what is the ground while running that the xk532 says to hook to the remote system? My 561r only has one ground wire that hooks to ground.

Replies:

Posted By: chriswallace187
Date Posted: January 10, 2008 at 7:07 AM

No you don't need resistors and relays - the data output and the mux output from the XK532 take care of that.

Ground when running(BypassKit) = status output(Valet).

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: stroker@techie
Date Posted: January 10, 2008 at 10:11 AM

sweet! Thanks alot!

Print Page | Close Window