Print Page | Close Window

dei 689m in 03 lancer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101006
Printed Date: May 16, 2025 at 10:33 PM


Topic: dei 689m in 03 lancer

Posted By: labe0202
Subject: dei 689m in 03 lancer
Date Posted: January 10, 2008 at 12:08 PM

Hello,

I'm going to be installing a Viper 5900 with a 689M.  My question is that the clutch doesn't need a positive or negative trigger to be bypassed, it is a "Type 4 System" which needs one of the wires to essentially be cut.  Do I need to use the clutch bypass included with the 689M or can I just wire it using a relay and the ground when running and starter wires like the DEI Type 4 system diagram shows?  I currently have a Compustar 2WSS-AS installed and have it wired this way and it works just fine.  If I don't use the clutch bypass feature of the 689M is it still going to work correctly?  Thanks!




Replies:

Posted By: labe0202
Date Posted: January 12, 2008 at 11:57 AM
Alright, it does work... don't need to use the included clutch bypass!


Print Page | Close Window