06 jetta diesel tach input?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101077
Printed Date: May 10, 2025 at 9:42 AM

Topic: 06 jetta diesel tach input?

Posted By: todds440
Subject: 06 jetta diesel tach input?
Date Posted: January 12, 2008 at 8:54 AM

Plan on doing R/S install on 06 Jetta diesel. Is there a good place to grab a tach signal on this vehicle? Also plan on using 556uw for transponder bypass. Is method 2 on the directions, what most of you guys are using for VW's(splice into factory transponder ring circuit)? Any input is appreciated. Thanks

Replies:

Posted By: tedmond
Date Posted: January 12, 2008 at 11:24 AM

Tachometer

RED / WHITE

(-)

AT INJECTOR #1

ALSO AT ECM MODULE AT CENTER OF FIREWALL

i would leave the rind alone and not tap into the immobilizer.

Posted By: todds440
Date Posted: January 13, 2008 at 6:54 AM

So what your saying is not to cut into wiring, do the looped wire around the cylinder?

Posted By: tedmond
Date Posted: January 13, 2008 at 9:18 AM

correct, use the RF ring they gave to you. This is because you are unsure which are your data wires.

Print Page | Close Window