Print Page | Close Window

remote start on a 2003 silverado

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101121
Printed Date: May 28, 2024 at 10:50 PM


Topic: remote start on a 2003 silverado

Posted By: kaos79
Subject: remote start on a 2003 silverado
Date Posted: January 13, 2008 at 4:32 PM

i have a problem with thia remote starter its a bulldog rs1100 and after i hookrd it up the brain just keeps clicking. the truck is base model which has no powerlocks,or powerwindows,or alarm .itried to hook up the bypass but it says tap it to wires that go from the steering colum but i didnt see any. does anybody know what may be wrong?



Replies:

Posted By: Twelvoltz
Date Posted: January 13, 2008 at 8:27 PM
For the clicking: right on Bulldog's home page there is a Huge banner that says "if your unit is clicking on and flashing the parking lights click here"...might want to check that first.

What bypass module do you have?

What wires are you looking for? I would have to assume that you are looking for the passlock II wires. There are a large number of posts on the site that cover the passlock II system in very good detail, have a look around and post the exact make and model of your bypass and someone here should be able to help.


-------------
Installer, IT support, and FFL. I need less hobbies.




Posted By: kaos79
Date Posted: January 13, 2008 at 10:26 PM
the bypass is the the universal bypassmodule 791,and the wires i cant find is for the passlock.but the brain clicks with or without the by pass do i have to use it?         but thanks for the reply.




Posted By: brhaugen
Date Posted: January 14, 2008 at 6:28 AM

2003 Chev truck is deffinatly a Passlock II and needs to be bypassed.






Print Page | Close Window