dual parking light wires
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101216
Printed Date: July 07, 2025 at 5:08 PM
Topic: dual parking light wires
Posted By: lochlin
Subject: dual parking light wires
Date Posted: January 16, 2008 at 4:55 AM
Hello,I have a 2002 jeep liberty which I am installing a remote starter into,my question is there are 2 parking light + outputs on my rs one for each side it says,can I just hook up one of these wires to my main parking light wire or do I need to run to each light?I know I need to use a relay because my lights are -.Thanks for any info.
Replies:
Posted By: KPierson
Date Posted: January 16, 2008 at 6:17 AM
Some cars have seperate circuits for each parking light. If your vehicle only has one parking light then you only need one output.
-------------
Kevin Pierson
Posted By: lochlin
Date Posted: January 16, 2008 at 9:37 PM
I have another question,my remote start does not have any extra (-)or(+) start outputs,I need to bypass my clutch and was wondering if I could use the (-) trigger from my bypass mudule output to power a relay and bypass the clutch.It's a (-) output,it won't effect my module and should be on the same time as the output to my starter wire.My
|