Print Page | Close Window

2005 equinox xk06 pkg7

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101235
Printed Date: May 13, 2024 at 6:34 PM


Topic: 2005 equinox xk06 pkg7

Posted By: avenger2008
Subject: 2005 equinox xk06 pkg7
Date Posted: January 16, 2008 at 4:23 PM

I have a XK06 PKG7 Bypass Module Platform #06.
 
Vehicle a 2005 Chevy Equinox.
Passlock Sensor Connector 3-way BK:
Pin A  OG/WH_812__12-Volt Reference.
Pin B  OG/BK_1057__Sensor Low Reference.
Pin C  YE_1836__Security System Sensor Signal.
 
XK06 Pin 1 Brown Wire connected to RS Ground when running.
 
XK06 Pin 2 Green Wire connected to key Ignition side, yellow wire 1836.
 
XK06 Pin 3 Blue Wire connected to BCM side, yellow wire 1836.
 
XK06 Pin 4 Violet/White, Instructions unclear which wire on the Equinox to connect to.
 
XK06 Pin 5 Violet Wire, Tee'ed to OG/BK wire 1057.
 
XK06 Pin 6 Pink/White Wire Not used ?
 
XK06 Pin 7 Pink Wire Not used ?
 
XK07 Pin 8 Orange Wire to RS Start.
 
XK06 Pin 9 Red, Instructions unclear which wire on the Equinox to connect to.
 
XK06 Pin 10 Black to Chassis Ground
 
https://xpressdownload.com/getdocument.aspx?documentid=420    instructions show different connectors and wires than for the Equinox.
 
Has anyone connected a XK06 to a 2005 Equinox ?
 
posted_image


-------------
TC



Replies:

Posted By: chadwa2003
Date Posted: January 16, 2008 at 7:41 PM
Hey you are folowing the wrong diagram and using the wrong firmware. You need to use plxr version 1.0 Here is the install manual that you should be following.
https://www.bypasskit.com/getdocument.aspx?documentid=673




Posted By: robertsc
Date Posted: January 16, 2008 at 7:44 PM

i've had problems with the non starter wire bypasses from bypasskits

equinoxes and canyons

and found that the fortin passlock sl are more reliable





Posted By: avenger2008
Date Posted: January 18, 2008 at 11:55 AM

Hey chadwa2003,

Thanks for slapping me back of the head.     One of those days, thinking one thing, looking at it as something else.

Reflashed the XK06 to PLXR v1.02, and rewired to the correct drawing.

Works as its suppose to,   Thanks for the input.       posted_image



-------------
TC





Print Page | Close Window