Print Page | Close Window

ford fusion 2006 factory alarm disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101246
Printed Date: May 20, 2024 at 11:30 PM


Topic: ford fusion 2006 factory alarm disarm

Posted By: hbsalomp
Subject: ford fusion 2006 factory alarm disarm
Date Posted: January 16, 2008 at 8:30 PM

Based on information I have found for the Ford Fusion 2006 - 4cyl, the Factory Alarm Disarm is a PURPLE / brown wire landing at pin 5 / connector C at the SJB under the dash, driver kick.

How do I identify the different connectors ?

Which one is A ? ; Which one is B ? ; Which one is C ? ; and so on.

Thanks in advance !



-------------
HJ



Replies:

Posted By: KarTuneMan
Date Posted: January 16, 2008 at 10:09 PM

Actually you don't need to disarm for remote start. When the ign. is triggered it will disarm!

But, if you want to, the plug is blue.



-------------


Print Page | Close Window