Window Module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10138
Printed Date: July 30, 2025 at 4:44 AM
Topic: Window Module
Posted By: bizzy818
Subject: Window Module
Date Posted: February 26, 2003 at 8:32 PM
I want to know the colors for window module on 94 honda Accord EX.
Replies:
Posted By: Velocity Motors
Date Posted: February 26, 2003 at 8:39 PM
| LF WINDOW UP/DN|RED / yellow - RED / blu|A |drivers switch |
| RF WINDOW UP/DN|blue/yel - blue/grn |A |drivers kick panel |
| LR WINDOW UP/DN|yellow - yellow/grn |A |dkp, harness to rear |
| RR WINDOW UP/DN|yellow - yellow/grn |A |dkp, harness to rear | ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: bizzy818
Date Posted: February 26, 2003 at 10:55 PM
Can you be more clear. I do not get what you mean by, drivers kick panel. My module has a wrie that is suppose to go to 500ma. activation and where is that? and another wire that is suppose to go to accessory item, where is dat? thnx
Posted By: bizzy818
Date Posted: February 26, 2003 at 10:58 PM
wats a dmm?
Posted By: robHI
Date Posted: February 27, 2003 at 3:10 AM
digital multimeter, everyone is suppose to know that
bizzy818 wrote:
wats a dmm?
Posted By: Velocity Motors
Date Posted: February 27, 2003 at 5:22 AM
The activation wire is from your alarm or RS ( remote starter ) and this channel outputs a (-) to activate the window module. The driver's kick panel is the area by the driver's left foot where the plastic panel covers the side of the fuse panel on most vehicles.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: bizzy818
Date Posted: February 27, 2003 at 4:35 PM
i KNOW WAT A KICK PANEL IS WHAT i DON'T GET IS- | LF WINDOW UP/DN|RED / yellow - RED / blu|A |drivers switch |
| RF WINDOW UP/DN|blue/yel - blue/grn |A |drivers kick panel |
| LR WINDOW UP/DN|yellow - yellow/grn |A |dkp, harness to rear |
| RR WINDOW UP/DN|yellow - yellow/grn |A |dkp, harness to rear | |
YOU TELL ME THE COLORS AND NEXT TO IT U SAY DRIVERS SWITCH, DRIVERS KICK PANEL AND ON. WHAT YOU MEAN BY DOES? -------------
Posted By: bizzy818
Date Posted: February 27, 2003 at 4:38 PM
Wires on the module
500ma. activation
Accessory item On where on the alarm do this wires go? thnx
Posted By: Velocity Motors
Date Posted: February 27, 2003 at 5:56 PM
STOP USING UPPER CASE PLEASE. I can hear you just fine. Here is some clarification for the wiring above: - Driver's Switch - this wire can only be accessed from the driver's switch.
- Driver's kickpanel - this wire can be found the the driver's kickpanel, but you will have to search for it as it probably won't be just lying infront of you
- DKP, harness to rear - this means that the wire is located in the driver's kickpanel but will be in a harness to the rear of the vehicle
The 500ma wire is your activation wire from the alarm system that will activate the window module to roll up or down the windows. This has to be a constant (-) like the starter disable wire or an AUX wire that you can set to constant or latched . A pulsed signal will not work on this module. Accessory item : DO not use ( Not necessary ) ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: bizzy818
Date Posted: February 27, 2003 at 7:52 PM
Velocity Motors wrote:
STOP USING UPPER CASE PLEASE. I can hear you just fine. Here is some clarification for the wiring above: - Driver's Switch - this wire can only be accessed from the driver's switch.
- Driver's kickpanel - this wire can be found the the driver's kickpanel, but you will have to search for it as it probably won't be just lying infront of you
- DKP, harness to rear - this means that the wire is located in the driver's kickpanel but will be in a harness to the rear of the vehicle
The 500ma wire is your activation wire from the alarm system that will activate the window module to roll up or down the windows. This has to be a constant (-) like the starter disable wire or an AUX wire that you can set to constant or latched . A pulsed signal will not work on this module. Accessory item : DO not use ( Not necessary )
what does DKP mean? and you know were I can buy door lock and unlock module? thnx
Posted By: Velocity Motors
Date Posted: February 27, 2003 at 8:47 PM
DKP = Driver's kick panel. If you have the Accord EX it should have power door locks already. Does it not have OEM power door locks ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: bizzy818
Date Posted: February 27, 2003 at 10:29 PM
Velocity Motors wrote:
DKP = Driver's kick panel. If you have the Accord EX it should have power door locks already. Does it not have OEM power door locks ?
Yes it does but I want to install it on my alarm. So i can lock and unlock with my alarm remote. thnx
Posted By: Allen1964
Date Posted: February 27, 2003 at 10:45 PM
Posted By: Velocity Motors
Date Posted: February 28, 2003 at 5:32 AM
POWER LOCK|BLACK/ white |- |gray conn. above fuse
POWER UNLOCK|orange |- |box in blue tape These are the wires you need to tap into from your alarm system. It will be a straight connection because your alarm is probably a (-) output for door locks. You might have one other wire to ground to choose polarity of the door lock system, but read your installation manual to be sure. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|