Print Page | Close Window

05 dodge magnum rke low battery

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101418
Printed Date: May 12, 2025 at 5:38 PM


Topic: 05 dodge magnum rke low battery

Posted By: asag20
Subject: 05 dodge magnum rke low battery
Date Posted: January 20, 2008 at 11:25 PM

Hi fellow members, thanks for any help in advance, i install a combo system on this car and i used the bypasskits interface that did the locks & the bypass, the Mux cct. too had it's input from the bypass so i did not use any relaysor resistors,everything works fine when i remote start the car, but there is a reading on the cluster R K E Battery Low, and it keeps flashing then it will beeps a loud sound every 15 minutes, i then try with resistors & relays for the Mux cct. and i still have the same trouble, but something funny, when i insert the key & remote start the car there is no R K E Battery Low display. please any help will be much appreciated.
Jeff could you please help in this trouble.

-------------
ready to help others.



Replies:

Posted By: brhaugen
Date Posted: January 21, 2008 at 6:25 AM
what model of remote start/alarm? what model of bypasskit?




Posted By: Velocity Motors
Date Posted: January 21, 2008 at 9:07 AM
Replace the battery in your OEM key FOB.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: offroadzj
Date Posted: January 21, 2008 at 8:22 PM
Where did you ground the r/s? Its a long shot, but if the ground isnt solid enough it may be throwing off the draw from the ignition. Again, probably a long shot, but its worth a try.

Kenny

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205




Posted By: another-kelly
Date Posted: January 21, 2008 at 8:46 PM
it checks for battery voltage in the OEM keyfob when the vehicle is starting/running. remote starting without the keyfob in the ignition gives the message. should disappear when you do key takeover




Posted By: offroadzj
Date Posted: January 21, 2008 at 8:50 PM
as long as it goes away with key take-over, id say screw it.. lol

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205





Print Page | Close Window