adding remote start 02 tahoe oem keyless

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101448
Printed Date: April 19, 2024 at 7:09 PM

Topic: adding remote start 02 tahoe oem keyless

Posted By: S.I.Autosports
Subject: adding remote start 02 tahoe oem keyless
Date Posted: January 22, 2008 at 5:22 AM

I am going to be adding a remote start to the factory keyless on a 02 Tahoe. Anyone know which wire I will need to interupt so the keyless will work while the truck is remote started? The ignition wire to the BCM? Anyone know the color/pin # ?

Replies:

Posted By: rudydapimp
Date Posted: January 22, 2008 at 6:51 AM

im pretty sure that most Gm's transmitters will work while the truck is running.

Posted By: Twelvoltz
Date Posted: January 22, 2008 at 9:45 AM

As rudydapump mentioned, your keyless will work fine when running under the RS. No need to cut anything.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: S.I.Autosports
Date Posted: January 23, 2008 at 3:45 AM

Thanks guys! I was thinking most newer cars won't let you use the remote if the car is running.

Print Page | Close Window