Print Page | Close Window

python 990 arm and disarm chirp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101465
Printed Date: May 17, 2025 at 1:29 PM


Topic: python 990 arm and disarm chirp

Posted By: viper92086
Subject: python 990 arm and disarm chirp
Date Posted: January 22, 2008 at 2:50 PM

Hey guys i was just working on my car and musta went leaning on my remote but when i hit arm or disarm the remote nor the car makes a chirp. But it does do what it is supposed to do. Say i arm the car then kick the tire the alarm will go off and the remote will beep or if i am out of range the remote will beep.. How do i get my arm and disarm confirmation chirps back on my remote and my alarm?



Replies:

Posted By: Twelvoltz
Date Posted: January 22, 2008 at 8:03 PM
Pressing aux prior to hitting the lock/arm button or unlock/disarm button should silence the system only for that particular lock/unlock sequence. By arming via silent mode it also turns off the warn away chirps. Are you saying that you managed to get the arm/disarm chirps turned off via the remote? This is normally a feature that can only be changed via the programming button.

You can get the owner's manual for your system here.

The install manual is in the downloads section of this site here. Feature programming starts on page 40.

-------------
Installer, IT support, and FFL. I need less hobbies.


Print Page | Close Window