keyless enty 06 tundra quad cab

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101557
Printed Date: July 14, 2025 at 9:47 AM

Topic: keyless enty 06 tundra quad cab

Posted By: dsorensen11
Subject: keyless enty 06 tundra quad cab
Date Posted: January 25, 2008 at 1:19 PM

I want to hook up doorlocks to my Astrostart remote starter. The truck already has OEM keyless entry. Is there a simple connection I can make from the R/S lock and and unlock wires, since there is already keyless entry in the vehicle. Or do I have to wire in a relay in the drivers door as per document 1070. I want the the remote starter to work the same as the OEM keyless entry with progressive unlocking. Thanks for any help.

Replies:

Posted By: usabuilt
Date Posted: January 25, 2008 at 1:24 PM

Looks like you need to get the lock wires in the door on that truck, then you would need to add a relay to the lock motor if you want to unluck the driver door on first press of transmitter..not that easy if you have never done it before.

Posted By: KarTuneMan
Date Posted: January 25, 2008 at 9:03 PM

There is a blk / YELLOW in a white plug in the drivers kick This is the drivers door unlock. Wire it rev. polarity triggered by first unlock.

The harness goes into the drivers door, but YOU don't need to!

-------------

Posted By: dsorensen11
Date Posted: January 28, 2008 at 9:58 AM

Thanks KarTuneMan,
Is there a wire in that harness that I can access for the lock function as well? Also, will pulsing the unlock wire to ground disable the door security or will I need to make an additional connection to do that. When I unlock the door with the OEM remote it disables the security.
Thanks.

Print Page | Close Window