programming clifford matrix 12.5x

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101586
Printed Date: April 28, 2024 at 3:35 PM

Topic: programming clifford matrix 12.5x

Posted By: entex
Subject: programming clifford matrix 12.5x
Date Posted: January 26, 2008 at 12:43 PM

Hi everyone, I just bought the matrix 12.5x and was trying to change some options. Now I have the install and users manuals, I have searched these forums but I can not find the sequence or how to program my alarm.

I basically want to change the settings that RE Factory basic to what I want it to do.

Thanks in advance.

94 explorer

Replies:

Posted By: swerve
Date Posted: January 26, 2008 at 6:51 PM

open a door, turn the key on then back off, hold the valet button down. it will now chirp to indicate wich menu you are in, when you find the one you want release the valet and press it the number of times for the feature you are programming. hold it in and it will chirp to indicate wich feature number you are in. then press the lock or unlock button to change the settings. to move up the menu press the valet again and hold, then repeat the lock/unlock for what you want. if you have the install manual its toward the back on page 22.

-------------
git yer swerve on!

Posted By: entex
Date Posted: January 27, 2008 at 5:49 AM

ok thanks, I saw that but some how missed the turning the key off again.
I will try in the morning.

Thanks