ads rng c2 idatalink 04 srt 4
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101633
Printed Date: July 07, 2025 at 7:47 PM
Topic: ads rng c2 idatalink 04 srt 4
Posted By: StealthEs
Subject: ads rng c2 idatalink 04 srt 4
Date Posted: January 27, 2008 at 5:42 PM
Swapped out my Viper 791XVL for a Compustar 2WSS-AS with an Idatalink module ( ADSADCA )software ADS-AL(DL)-CH. Everything went fine alls perfect as far as the Alarm/R-Start. Only thing is I can't get the ADS-RNG-C2 to program. Followed the direction everything goes well until I try to learn the Skim on the C2.
Anyone have any luck with programming one of these? The only thing I can think of is that I need to ground the key sense wire as well as jumping the 12V and Ignition.
-------------
Cris
Replies:
Posted By: StealthEs
Date Posted: January 27, 2008 at 6:10 PM
Noticed the one the coverage chart
https://www.idatalink.com/store/index.php?l=product_detail&p=33
my car isn't listed.
But on the ADS-AL(DL)-CH install guide, it lists that I need the ADS-RNG-C2.
-------------
Cris
Posted By: StealthEs
Date Posted: January 27, 2008 at 6:22 PM
I'm retarted, I used the wrong RNG. I'll try using the C1 rather then the C2 on Monday.
-------------
Cris
Posted By: StealthEs
Date Posted: January 28, 2008 at 3:11 PM
Used the C1, programmed on the first try.
-------------
Cris
|