06 terraza, bypass module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101720
Printed Date: May 06, 2024 at 12:31 AM

Topic: 06 terraza, bypass module

Posted By: tintman97
Subject: 06 terraza, bypass module
Date Posted: January 30, 2008 at 4:04 PM

i Used a gmbp on this fine turd, and the van starts fine no prob. But the Factory keyless entry and sliding door dont work no more. What module can i use that this wont happen. Bypasskit says to use a IM01 then says too hook data line up to tan/white in BCM connector c2 pin #37 well, there is no tan/white in #37. I found the doorlocks in the same harness so it is C2 connector. door locks ar Pin 2 and pin 11 OK i counted that and yup thats correct. So in counting from there should be able to find to no avail.???????

Snapper

Replies:

Posted By: KarTuneMan
Date Posted: January 30, 2008 at 4:15 PM

GM SL2, GM SL2i, Thes both claim to opperate the sliding doors.

There are a few idata modules as well.

-------------

Posted By: tintman97
Date Posted: January 30, 2008 at 8:53 PM

Im doin a one button mars 11. No need Trilogix is telling me the data line is crashing. Try another module well the gmbp will do pk3. @ diffrent installs i did install 1. Install 2 does not match the wiring. Again the car starts and runs fine with the RS but then the doors will not work. Disconnect the power and the doors will work after 20 mins or so ???

Snapper

Posted By: tintman97
Date Posted: January 30, 2008 at 9:08 PM

Does DEI have a guide on this. Has Anyone else done one yet using a dei/trilogix/omega bypass

Snapper