code alarm csi 300 remote start

I have a codel alarm csi 300 and hooked a bulldog rs 82  remote start to it on the 2nd channel out put on the alarm my prob is i have to hit the button on my keyless entry 9x to start and 9x to stop  ,bulldog  manual says after market alarm hit key 3 times to start and stop , so i called code alarm and they tell me unless i can get bulldog unit to pulse neg less then i got to hit the button 9x  , so i called bulldog and they tell me it shouldnt matter i should hit it 3x and it should start any ideas?

-------------
wes5314

That's a long sentence you wrote, but I think I understand.

Every time you press the trunk button on the Code Alarm, it makes a 1.0 second pulse, no matter how long you hold the button.

I think if you adjust the speed at which you press the button, you might be able to get it to work with three presses.

Something like, press and hold, release, wait 3/4 second, repeat............ if you repeat too quickly, the Bulldog just sees one long ground, instead of separate pulses.

Basically, after the first press, the Code Alarm needs a chance to stop its pulse for a moment, then you can repeat.

yeah that was what i was trying to say just couldnt get it out there code alram said to hook to door unlock neg and hit 3 x

but dont wanna do that theres gotta be easier way to do it.

-------------
wes5314