08 gmc van start wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101751
Printed Date: May 17, 2024 at 8:57 PM

Topic: 08 gmc van start wire

Posted By: sickntwisted
Subject: 08 gmc van start wire
Date Posted: January 31, 2008 at 4:30 PM

Now most New 07-08 GM's Are coming out with Build in Rs with sucks cause that makes it hard on me as an installer since they are doing this from the factory. N e who i have a 08 Gmc van to do and i use Code alarm CA530 remote starts and my print out form tech services Says :

Starter 2

PINK/BLACK

(+)

IGNITION SWITCH HARNESS

MAY ALSO BE PINK ON SOME MODELS, THIS WIRE WILL TEST (+) FOR KEYSENSE AND GO TO APPROXIMATELY 5 VOLTS WHEN THE IGNITION CYLINDER IS TURNED TO ACCESSORY OR IGNITION, FOR REMOTE START INTEGRATION

I have 100's of alarms and Remote starts under my belt and i have never come across this any help would be nice thanks

Replies:

Posted By: hydroz_23
Date Posted: January 31, 2008 at 6:26 PM

just use a xk06, it will do the start and transponder bypass

Posted By: Mike M2
Date Posted: February 01, 2008 at 9:39 AM

Many new GM products are sharing an ignition wire for multiple functions. Practically all the trucks do this now...

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: rojadoja
Date Posted: February 01, 2008 at 12:30 PM

Just like hydroz_23 said use the xk06, its works awesome with anything PK3+. The instructions for the XK are pretty much dead on just get your immobilizer wires and passlock wires in two different plugs by the ignition.