testing sensors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101793
Printed Date: May 05, 2025 at 4:22 PM

Topic: testing sensors

Posted By: audioman2007
Subject: testing sensors
Date Posted: February 02, 2008 at 9:01 AM

Is there a way to test a sensor prior to actually installing it into the car? The reason I ask this is because I have a glass break sensor which is made by skytec. I already have my shock sensor installed and mounted in the car. My shock sensor does have a green and red light indicator when I tap the sensor itself. i just dont want to splice into the shock sensors wiring and later find out this new sensor doesnt work.

Replies:

Posted By: audioman2007
Date Posted: February 02, 2008 at 12:42 PM

Has anyone ever installed and adjusted the skytec glass break sensor?

Posted By: audioman2007
Date Posted: February 03, 2008 at 10:54 AM

And I want to get a microwave and tilt sensor. How reliable are DEI and scytek sensors?

Print Page | Close Window