diag 562t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101810
Printed Date: May 05, 2024 at 4:00 AM

Topic: diag 562t

Posted By: gpgtp00
Subject: diag 562t
Date Posted: February 02, 2008 at 5:06 PM

How it goin everyone. Im having some issues on my buddies 06 Escape. I installed a 562T and once in a while it will not RS. The lights just flash 3 times. I looked at the install and owners manual but didnt find anything. Am i just not seeing it there? Thanks

Replies:

Posted By: swamprat323
Date Posted: February 11, 2008 at 12:13 AM

what does the shut down diagnostics say. go to page 36 of the install guide

Posted By: chriswallace187
Date Posted: February 11, 2008 at 11:50 AM

Which bypass did you use?

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: gpgtp00
Date Posted: February 11, 2008 at 8:57 PM

i used a XK04 bypass. i gotta check out the shutdown and see what that says. The ignition doesnt even cycle though.

Posted By: chriswallace187
Date Posted: February 12, 2008 at 10:02 AM

If you haven't already, you may want to try it with the PKF3 firmware and not the PKFORD that it comes shipped with. I've had issues on some late model Fords with using the PKFORD. Be sure to note the slightly weird programming sequence.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Print Page | Close Window