valet 712t factory alarm ouput
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101811
Printed Date: May 04, 2025 at 2:24 AM
Topic: valet 712t factory alarm ouput
Posted By: jdebuhr
Subject: valet 712t factory alarm ouput
Date Posted: February 02, 2008 at 5:45 PM
Hi all,
I have installed a couple alarms/keyless entry systems in the past but this one has me stumped
in the install manual it explains all of the outputs/inputs to the alarm, btu when I get to the info on the Factory Disarm wire I get this:
H1/13 LT. GREEN/ BLACK Factory Alarm Disarm
This wire supplies a
nothing after that. I searched here, found a couple posts with links to the same manual, with the same explanation. I am hoping it is a grounding signal, but have not tried it yet, i was hoping someone her ran into this issue
Replies:
Posted By: Mike M2
Date Posted: February 02, 2008 at 5:48 PM
Funny, this is a wire i'm dealing with right now. It is a negative pulse before start and also during disarm.
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: jdebuhr
Date Posted: February 02, 2008 at 5:54 PM
Mike M2 wrote:
Funny, this is a wire i'm dealing with right now. It is a negative pulse before start and also during disarm.
COOL Thanks!! that is what I was hoping for.. I will finish up the install tonight.
Posted By: jdebuhr
Date Posted: February 02, 2008 at 8:24 PM
Got that working now neither of the AUX outputs ground when pressed.. Any thoughts? or is the unit bad?
|