programing compustar remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101834
Printed Date: May 05, 2025 at 1:16 AM
Topic: programing compustar remote
Posted By: twin_turbo
Subject: programing compustar remote
Date Posted: February 03, 2008 at 3:09 PM
hey guys, i tried programming the compustar 2 way remote and when i turn it off and on 5 times, i always keep getting 2 flashes. Does anyone knoe what the problem is? Thank you.
Replies:
Posted By: derekrobi
Date Posted: February 03, 2008 at 4:13 PM
2 flashes would indicate programming mode has expired or timed out, have you been able to program any remotes (you said the 2 way remote) - also, what unit, car and bypass are you using.
Posted By: twin_turbo
Date Posted: February 03, 2008 at 4:22 PM
its a 96 Jetta, and its a compustar 2W800FMAS, i have not been able to program any remotes. I read the manual and for 2 flashes it says "KEY ON" but i removed the key after the 5th turn.
Posted By: mikvot
Date Posted: February 03, 2008 at 7:57 PM
Turn the ignition, on,off,on,off,on,off,on,off,on....leave the igntion on, you should get one parklight flash. Push the 1 button, parklights should flash to confirm programming. If you have been turning the key off on the fifth turn, then you are cancelling out the programming, that is why you are getting 2 flashes. If this doesn't fix it, you need to check your antenna, or you possibly have a bad tx. -------------
Posted By: dswift
Date Posted: February 04, 2008 at 10:04 AM
or you simply have to wrong remote with the wrong antenna.
I think your doing it right but your just not seeing the first flash.
Go by the relays triggering. it's obvious that your doing you see the two flashes. Now you just have to hear for the first one.
-------------
"dont ground out!"
Posted By: derekrobi
Date Posted: February 05, 2008 at 6:02 PM
Hey TwinTurbo - did you get it working yet?
Posted By: twin_turbo
Date Posted: February 12, 2008 at 7:43 PM
hey guys i got it to work, thanks for the suggestions. I just kept trying and it eventually worked. I think i wasnt turning it "on and off" correctly.
Posted By: derekrobi
Date Posted: February 13, 2008 at 5:14 AM
Nice job
|