Print Page | Close Window

94 explorer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101851
Printed Date: May 13, 2024 at 6:00 AM


Topic: 94 explorer

Posted By: driverpsd
Subject: 94 explorer
Date Posted: February 04, 2008 at 8:06 AM

Im trying to get the door locks to operate with a viper 791xv in a 94 explorer. I used the reverse polarity diagram from this site but they do not work. The relays click, but the locks dont move. What did I do wrong?
Thanks!



Replies:

Posted By: KarTuneMan
Date Posted: February 04, 2008 at 8:42 AM

If the rig didn't come with key factory, the locks are rev. polarity. Otherwise they are neg. trigger.

Are you certain of your application?  pink/yell   pink/grn  

How did you test your lock wires?  After cutting the wire does the switch side throw 12v. ?



-------------



Posted By: driverpsd
Date Posted: February 04, 2008 at 8:57 AM
I am certain I have the right wires. The wires do show 12v on the switch side.


Print Page | Close Window