smart windows 4 wiring diagram?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101862
Printed Date: April 28, 2024 at 10:45 AM

Topic: smart windows 4 wiring diagram?

Posted By: duvlitho
Subject: smart windows 4 wiring diagram?
Date Posted: February 04, 2008 at 3:34 PM

I have 2 smart windows 4 modules that have just been sitting in the garage for a couple of years now. I decided to get off my lazy bum and get these installed. I currently have the viper 791xv in my '97 chevy c3500. If anyone can email me a wiring diagram it would be GREATLY appreciated. Thanks!

dustin

Replies:

Posted By: duvlitho
Date Posted: February 06, 2008 at 11:40 AM

I figured out everything but how to interface the 791xv to the sw4 module. There are 2 black wires on a little 3 wire plug. Can I piggy back the second sw4 via the second port on the first sw4 module? thanks!

Posted By: duvlitho
Date Posted: February 06, 2008 at 7:55 PM

Here are some pics of the smart windoes 4 module

posted_image

Posted By: corrysmtx
Date Posted: February 08, 2008 at 10:12 AM

we would have to know what those inputs are for

-------------
1 12" mtx 9500 4ohm dvc 1 8100d and 1 1501d almost loud enough to cover the sounds of my car dying.

Posted By: duvlitho
Date Posted: February 08, 2008 at 11:08 AM

Anyone have any smart windows 4 install documents?

Posted By: OmarR
Date Posted: February 11, 2008 at 11:49 AM

Those are databus connections. You can only use Smartwindows 4 with a Clifford G4 or G5 system.

https://www.guardianalarms.net/home_security_manuals/Clifford-Electronics/smartwindows4-install.pdf

https://www.guardianalarms.net/home_security_manuals/Clifford-Electronics/smartwindows4-owners.pdf

Print Page | Close Window