clifford bullet 2 diagram
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102020
Printed Date: April 24, 2024 at 8:43 AM
Topic: clifford bullet 2 diagram
Posted By: GReddyboy
Subject: clifford bullet 2 diagram
Date Posted: February 09, 2008 at 1:19 AM
does anyone have an install manual for the oldschool clifford bullet 2 please thanks
Replies:
Posted By: swamprat323
Date Posted: February 10, 2008 at 10:38 AM
Clifford owners and wire guide is in the down load section now
Posted By: GReddyboy
Date Posted: February 10, 2008 at 1:35 PM
thank swamprat323, but I needed the install manual; because I need to know how to program the normally closed relay to normally open. Thats great you upload the manuals for the community to use. Clifford; before DEI bought them out had all their manuals posted up and I miss that. heh oh well thanks again
Posted By: tedmond
Date Posted: February 10, 2008 at 4:40 PM
what are you using the relay for? you cant prgram a relay. you can program the output on the unit to control what the relay will do.
Posted By: GReddyboy
Date Posted: February 10, 2008 at 10:35 PM
yes im trying to program the unit's armed output for the relay to operate in normally open configuration. Using it for ignition kill. thanks
Posted By: tedmond
Date Posted: February 11, 2008 at 2:59 PM
using a normally open configuration isnt the best option to use. i would use the normally closed. sometimes the normally open, if your unit is defective and doesnt send a ground, you will be stranded wheever you are.
Posted By: GReddyboy
Date Posted: February 11, 2008 at 9:47 PM
i rather take that risk than having a car stolen, which happens to most normally close relay configurations. Whats a point of having an alarm if it isn't effective? Plus the car it's going into does not have full coverage. I might install a back up switch in case if it does fail. Tedmond, have you personally seen a lot of NO relay configurations fail? Installing alarms isn't my profession so I wouldn't know.
Posted By: GReddyboy
Date Posted: February 11, 2008 at 9:59 PM
and what brand do you see that fails? As far as i know I think Clifford and Crimestopper are probably the only ones that has the NO for its immobilizer. Do you know of any more? Those are the ones I use for my own and family cars.
Posted By: GReddyboy
Date Posted: February 15, 2008 at 1:12 PM
.
Posted By: GReddyboy
Date Posted: February 18, 2008 at 4:57 AM
umm any installer can link me to the install manual for the bullet 2?
Posted By: swamprat323
Date Posted: February 18, 2008 at 10:10 AM
i dont think you find the bullet 2. i though well i head any ways Clifford b4 dei the alarm never came with install guides the shops only had a master set of install guides. unless some put them up online or has them.
any ways i have the install guide for the bullet 4 maybe that will help ya. you can always change it back if not right. most of the basic programing should be the same.
Posted By: GReddyboy
Date Posted: February 18, 2008 at 12:59 PM
I think the bullet 4 uses a completely different valet switch, but i'll give it a try anyways. thanks
|