ignition control unlocking
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102021
Printed Date: April 28, 2024 at 6:12 PM
Topic: ignition control unlocking
Posted By: kemetuimay
Subject: ignition control unlocking
Date Posted: February 09, 2008 at 1:22 AM
Hi can someone show me how to turn off the ignition control lock/unlock feature on Viper 791xv because i hated when it lock the car when i started the ignition thank you
Replies:
Posted By: mobile1
Date Posted: February 09, 2008 at 1:32 AM
open the door, turn the ignition on then off and press the Valet button twice holding it down on the second push.
Once the LED and siren blink/chirp once, let go of the button and push it 4 more times holding the 4th push. the siren and led will blink/chirp 3 times.
continue to hold the button and press unlock on the transmitter.
let go of the button and push it 2 more times holding the second press down. The siren and LED will blink/chirp 4 times.
continue holding the button down and press unlock on the transmitter.
release the button on the valet switch and turn the ignition on then off. You should be done now.
Posted By: kemetuimay
Date Posted: February 09, 2008 at 7:03 PM
thanks for your help but i tried doing it today and it didn't work wheni turned the key on then off and i clicked the valet button 2 time and hold it and nothing happen except the led just stay glowing can you give me extra help
Posted By: mobile1
Date Posted: February 09, 2008 at 8:39 PM
Year make and model of car?
Sounds like you don't have a door trigger hooked up. If the 791 doesn't see an open door, it won't go into programing mode.
Posted By: JWorm
Date Posted: February 09, 2008 at 9:09 PM
Key ON, Key OFF.
Press and hold valet button until siren chirps ONCE.
Release valet button....Press valet button 4 times and continue to hold on fourth press. Siren will chirp 3 times. Press unlock on remote. Release valet button.
Either wait 15 seconds for programming to time out, or turn the ignition ON.
Posted By: mobile1
Date Posted: February 09, 2008 at 10:03 PM
My bad messed up the first step. one push. Thanks JWorm.
Posted By: kemetuimay
Date Posted: February 10, 2008 at 1:23 AM
My car is a 2004 crv but i just wire the door trigger wires right into the car and i didn't use the 791 relay is the programming only work with the relay
Posted By: tedmond
Date Posted: February 10, 2008 at 7:24 AM
door trigger wires dont require relays. so the prggramming for you should work just fine.
Posted By: kemetuimay
Date Posted: February 16, 2008 at 10:10 PM
how long does it takes for the first valet click to chirp because i hold the valet down but i didn't see anything happen except i think the LED light came on
|