2002 nissan maxima
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10203
Printed Date: May 14, 2025 at 10:44 AM
Topic: 2002 nissan maxima
Posted By: mobiletoys2002
Subject: 2002 nissan maxima
Date Posted: February 28, 2003 at 12:48 PM
Where do i catch the door lock wires at in this vehicle and where is the drivers door module at??
How do i disarm the factory without unlocking the doors?
Replies:
Posted By: jrilla
Date Posted: February 28, 2003 at 1:53 PM
The driver door module is in the door.
Since unlock requires a double pulse, a single pulse disarms without unlocking.
-------------
J Rilla
Owner/Installer
Posted By: Chris Luongo
Date Posted: March 01, 2003 at 7:58 AM
The power window switch is the driver's door module. It comes out by prying up on the rear edge first.
The locks are ORANGE / black and ORANGE / blue, and they test by turning the key in the door. Extended pulses will operate the two front windows up and down.
The Maxima disarms itself during remote start, so you won't need the "factory disarm" wire for anything. But, with the factory alarm armed, the trunk release is disabled. Split your trunk-pop output with two diodes, so it hits the unlock wire and the trunk release wire at the same time.
Also, if you do a search for the Infiniti G35, I outlined how I get wires into the door without taking the door panel off.
|