2007 chevy tahoe won’t remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102038
Printed Date: May 05, 2024 at 9:05 PM

Topic: 2007 chevy tahoe won’t remote start

Posted By: jmsounds
Subject: 2007 chevy tahoe won’t remote start
Date Posted: February 09, 2008 at 5:52 PM

hello everybody i realy need your help on this one i was doing a remote start on 07 chevy tahoe i was using ofa20 by crimestopper but i think accidently touch a wire coming from the the bypass module to ground i blew a fuse the car starts fine with the key but it won't start with the factory remote i was doing a two way pager and also i could not get the car to start with rs ---- i program the ofa20 but that's it it wont lock nothing but with the factory remote works fine

please help asap thanks

Replies:

Posted By: dtk1
Date Posted: February 09, 2008 at 6:16 PM

what bypass are you using all those cars need is the ignition to kick in and acc to drop and it starts right up. also check the resistence on the white wire

Posted By: jmsounds
Date Posted: February 11, 2008 at 10:57 AM

i'm using one by crimstopper ofa20 and i used them often and never have any problem with them but this car since is new i don't know nothig about

i don't know what i did but the car wor't rs with the factory rs it work fine with the key

Posted By: extreme1
Date Posted: February 11, 2008 at 11:03 AM

any trouble lights on the dash? oem start won't with a check engine light on.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta

Posted By: jmsounds
Date Posted: February 12, 2008 at 11:04 AM

the car is fine there is no light error everything works fine i been working on car alarms for 6 years and this one is giving problem

the car comes equiped with oem remote start now it wont rs i try hooking up a two way remote start with a crimestopper ofa20

Posted By: vitrox
Date Posted: February 16, 2008 at 7:35 PM

make sure that the factory remote start isn't disabled. you can check on the data center in the insrument cluster.

Posted By: jmsounds
Date Posted: February 18, 2008 at 3:44 PM

I FINALLY FIGURE OUT WHAT WAS WRONG IT WAS THE MODULE THE ONE I WAS USING ((OFA20)) NOW THAT I PUT IN A CANSL2 NEW VERSION

WORKS GREAT WITH THIS ONE I DIDN'T HAVE ANY PROBLEM WORKS GOOD ON 07 AND NEWER GM'S THANKS FOR YOUR ANSWERS

Posted By: tedmond
Date Posted: February 18, 2008 at 6:10 PM

nice to know you got it working, just refrain from using CAPS, it makes it seem as if your yelling.