Car Alarm Wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10204
Printed Date: May 14, 2025 at 7:21 AM
Topic: Car Alarm Wiring
Posted By: Rotax100uk
Subject: Car Alarm Wiring
Date Posted: February 28, 2003 at 1:03 PM
I have got hold of Rapid 100 alarm and i have got to have a wire which goes into the fuse box. but i need to know where in the fuse box it has got to go.on this site it says into a source which has a 12V DC current when in the RUN and START positionWhere in the fuse box would that be?
-------------
Rotax100uk
Replies:
Posted By: jrilla
Date Posted: February 28, 2003 at 1:38 PM
That is just an Ignition wire that you can find coming from the key cylinder that typically runs down the steering column. That is also where you will find your 12v constant power source. Let us know what car you have and we can get you a wire diagram for your car.
-------------
J Rilla
Owner/Installer
Posted By: Rotax100uk
Date Posted: February 28, 2003 at 2:02 PM
Peugeot 306 Year:- 1998 ------------- Rotax100uk
Posted By: jrilla
Date Posted: February 28, 2003 at 2:38 PM
I dont have much info on that car and the wire colors change from year to year. I do not have the wire diagram for a '98 306, but I have a '97 diesel, and a '96 306, and everyone is different. Look in the main ignition wire harness and let us know what you find. The colors I show as possibilities for Ignition are typically Yellow and an occasional Orange. For the starter wire it could be either blue or white. Sorry I can be of more help.
-------------
J Rilla
Owner/Installer
|