metrik car alarm, siren
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102075
Printed Date: November 04, 2025 at 3:55 AM
Topic: metrik car alarm, siren
Posted By: tak3pchd
Subject: metrik car alarm, siren
Date Posted: February 10, 2008 at 10:49 PM
I have hooked up a {[metrik 272] by metrikmobile}on my car. Everything works fine,(parking lights flash, shock sensor etc.),
but the siren makes a weak warbled sound when it is hooked up.
if i unhook the siren the system works fine as far as activating and flashing the lights for arm/disarm and triggering.
I have checked and doublechecked the wiring according to the manual.
thanx tak3pchd
Replies:
Posted By: chadwa2003
Date Posted: February 11, 2008 at 9:51 AM
Check your grounds for the main unit and the siren
Posted By: tak3pchd
Date Posted: February 12, 2008 at 8:38 AM
all grounds are good cause they are at the battery negative terminal.
could this be a problem? i mean if all the grounds are too close to each other. i am starting to think the "brain" of the alarm is defective. if so what can i do? the manufacturer does not have much support online. i got this alarm for $35. new. i was looking for a simple alarm. any suggestions.
thanx tak3pchd
Posted By: chadwa2003
Date Posted: February 12, 2008 at 3:32 PM
What is the condition of the battery terminals are the clean and free of corrosion
|