dei 509u trouble

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102121
Printed Date: May 11, 2024 at 10:36 PM

Topic: dei 509u trouble

Posted By: natethegreat11
Subject: dei 509u trouble
Date Posted: February 12, 2008 at 10:29 AM

Got it installed and was bench testing it, but it doesn't seem to respond to anything regardless of senstivity

I've only got one detector hooked up to it, because i buried the other one and its a lil bit of a bitch to get to. Is that whats causing my malfunction?

Thanks

Replies:

Posted By: Twelvoltz
Date Posted: February 12, 2008 at 10:38 AM

I am pretty sure that the device compares pressure between the two sensors to know when to activate. I could be wrong on this though.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: Big Dog
Date Posted: February 12, 2008 at 2:08 PM

That's correct. You need both.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Print Page | Close Window