Print Page | Close Window

clifford pagemate

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102168
Printed Date: May 04, 2024 at 10:25 PM


Topic: clifford pagemate

Posted By: showngo2000
Subject: clifford pagemate
Date Posted: February 13, 2008 at 4:49 PM

Does anyone have any information on the Pagemate by Clifford.  I saw it grayed out when I program my AG4 with Cliffnet Wizard.  Thanks.



Replies:

Posted By: ringojam
Date Posted: February 13, 2008 at 7:22 PM
Never heard of it must be a old system or discontinued unit.

-------------
Jamaica home of the worlds fastest man.



Posted By: OmarR
Date Posted: February 13, 2008 at 7:41 PM

The Pagemate was a module that connected to the AG3 units. By the time the AG4 came out, the Pagemate had been discontinued. Yes, I know that you see the option in the Cliffnet menu, but the Pagemate 4 was never developed as Clifford went bankrupt at that time, then later bought out by DEI.

An AG3 unit (Avantguard 3) with a Pagemate module became the Clifford Intellipage.

https://www.guardianalarms.net/home_security_manuals/Clifford-Electronics/intellipage-owners.pdf

The pagemate was cloned to an existing pager you had already. You could Arm, Disarm, Remote Start, etc, as long as you were within your pager's service area.  The POCSAG pager technology has long been replaced by FLEX, so this makes the Pagemate even MORE obsolete.

Hoped this helped!




Posted By: showngo2000
Date Posted: February 13, 2008 at 9:28 PM
Nice!  Thanks for the help.  So now my question is this:  Is there something like the Pagemate that can be added to an AG4?


Print Page | Close Window