accessory wire hook up

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102238
Printed Date: May 10, 2025 at 4:30 AM

Topic: accessory wire hook up

Posted By: kibblejeep
Subject: accessory wire hook up
Date Posted: February 15, 2008 at 7:58 PM

2005 wrangler Fox-8200 paging alarm. (-) accessory output to relay 85 on instructions. Do you hook up wire to starter disable relay or install new relay to power accessory wire. These instructions are not clear. Wire to "brain" does not seem heavy enough to run accessory. Thanks

-------------
kibblejeep

Replies:

Posted By: chadwa2003
Date Posted: February 15, 2008 at 8:59 PM

From the sounds of that wire it is just a second accessory wire trigger for a relay. You should have another wire called maybe neg out when armed.

Posted By: kibblejeep
Date Posted: February 16, 2008 at 4:36 AM

I think you are right. The manual for this thing is not very clear on a few things.

-------------
kibblejeep

Posted By: tedmond
Date Posted: February 16, 2008 at 12:30 PM

(-) accessory output from the unit allow you to wire up an additional relay. to wire up the additional relay, heres how

85 - (-) acc output 250mA from unit
86 - constant 12v
87 - high current ground fused @ 15 amps
30 - to second acc wire on car.

if you plan to do a starter kill, using the GROUND WHEN ARMED wire it to a relay

85 - GROUND WHEN ARMED
86 - to ignition 1

Cut your starter wire in half

87a - half of starter wire, Key side, ( wire comming from ignition barrel)
30 - hlaf of starter wire, Motor side (wire going to the front of the car)