Print Page | Close Window

2000 ford windstar, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102246
Printed Date: May 19, 2024 at 8:16 PM


Topic: 2000 ford windstar, remote start

Posted By: kakojan69
Subject: 2000 ford windstar, remote start
Date Posted: February 16, 2008 at 11:12 AM

Hi there..

I want to install remote starter in 2000 Ford Windstar, the only problem I have is this van has 3 ignitions the remote starter that have only 2 ignitions, how can I install this unit, someone told me to use relay but I not sure how to wire it

Can anyone help me with it

Thanks




Replies:

Posted By: tedmond
Date Posted: February 16, 2008 at 12:17 PM

this is what i have listed off my wiring charts

posted_imageIgnition 1 WHITE/ YELLOW (+) IGNITION SWITCH HARNESS 
posted_imageIgnition 2 VIOLET/ORANGE (+) IGNITION SWITCH HARNESS 
posted_imageAccessory 1 VIOLET/ORANGE (+) IGNITION SWITCH HARNESS 
posted_imageAccessory 2 YELLOW (+) IGNITION SWITCH HARNESS 
posted_imageAccessory 3 BLACK/ GREEN (+) IGNITION SWITCH HARNESS

test your wires, sometimes wiring charts are wrong.

to wire up an additional ignition with a relay, look on your unit and look for an optional (-) 250 - 500mA output for ignition or programmable output and wire it to a relay like so

85 - optional (-) output from unit
86 - constant 12v
87 - high current 12v fused @ 15 or 20 amps
30 - to second ignition wire on car.





Print Page | Close Window