04 or 05 tl, clutch wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102285
Printed Date: May 14, 2024 at 12:18 AM
Topic: 04 or 05 tl, clutch wire
Posted By: slicksam
Subject: 04 or 05 tl, clutch wire
Date Posted: February 17, 2008 at 3:36 PM
I was doing some searching for some wire information on the acura tl 04 or even 05 for the clutch wire color. I did the automatic version but I customer called me telling me that he has a manual TL. Anyone have info on this car? or does this car does not come manual. I know that you can choose if you want to drive auto or trip tronic. thanks ------------- Testing is the key
Replies:
Posted By: ppg231
Date Posted: February 17, 2008 at 7:26 PM
supply (-) start to Lt Green at clutch switch in addition to the regular start wire at ignition switch.
Posted By: tedmond
Date Posted: February 17, 2008 at 10:04 PM
make sure its a manual safe remote start.
Posted By: ppg231
Date Posted: February 18, 2008 at 8:00 AM
Agree!
Posted By: slicksam
Date Posted: February 18, 2008 at 4:34 PM
tedmond wrote:
make sure its a manual safe remote start.
what do you mean manual safe? ------------- Testing is the key
Posted By: tedmond
Date Posted: February 18, 2008 at 6:08 PM
from what i know, the only manual units avail for the market is by compustar, Prostart, Autopage, and a other few units. well, the manual safe unit is designed for manual transmissions. there are plenty of automatic tranny units, but to make it safe for your application, you will end up purchasing a 689m. it ensures you dont leave the car in gear by accident. If you did leave it in gear, and it started; the ebrake still wont do much. so my point is the manual safe allows/ensures your car is NOT in gear by sequence aka (Reservation Mode) .
Posted By: slicksam
Date Posted: February 18, 2008 at 6:41 PM
oh ok understood. My system is ready for automatic or standard transmission. just by cutting the loop on the unit makes it standard transmission. www.autostart.ca model 1755 thanks ------------- Testing is the key
Posted By: tedmond
Date Posted: February 19, 2008 at 2:22 PM
the unit is fairly simple to hook up. for the clutch bypass, if i remeber it was a negative, so take the (-) start output from the unit and connect it to the wire that shows ground when the clutch is pressed.
|