power windows

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102292
Printed Date: May 15, 2024 at 2:07 PM

Topic: power windows

Posted By: dj_lawz
Subject: power windows
Date Posted: February 17, 2008 at 8:12 PM

hey check this out, i installed a power window module to my alarm system, it does work but the windows on my car won't go up all the way or sometimes they don't move at all...... not even with me pushing on the door switch, what do you think the problem could be?

Replies:

Posted By: i am an idiot
Date Posted: February 17, 2008 at 9:12 PM

The one problem I can see, is that we have no idea what kind of vehicle you have, what type of window relay setup you used, and what kind of window module you used.

Posted By: dj_lawz
Date Posted: February 17, 2008 at 9:25 PM

i am an idiot wrote:

The one problem I can see, is that we have no idea what kind of vehicle you have, what type of window relay setup you used, and what kind of window module you used.

ok...

vehicle.........................2000 lincoln town car alarm 5900 viper

windows up (-) armed output all four

windows down (-) channel 6 pulsed at the moment

four window modules one for each window going up and down

this is how i got it wired.........

module...................window switch up/down.......2 wires

^^^^^^^^....................window motor up/down.........2 wires

^^^^^^^^ each window

i don't know if you get this but i don't know how to explain it better...

Posted By: dj_lawz
Date Posted: February 19, 2008 at 9:29 PM

hey maybe my window motors are going bad, or what do you think it might be?

Posted By: hydroz_23
Date Posted: February 19, 2008 at 10:27 PM

check the dip switches on the window mod, they probably need to be adjusted