Print Page | Close Window

toyota matrix 2005

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102309
Printed Date: July 07, 2025 at 11:03 PM


Topic: toyota matrix 2005

Posted By: tintman97
Subject: toyota matrix 2005
Date Posted: February 18, 2008 at 11:55 AM

Im useing a IM05 with pkt2 firmware. On the ECU under or behind what u prefer to call it, I can not find the correct plug or wires. Says plug style E5 pin 26 and 27. Any one have any advice.

Snapper



Replies:

Posted By: Big Dog
Date Posted: February 18, 2008 at 12:50 PM

E5 is a 35 pin connector at the Engine Control Unit (ECU) behind glove box (middle plug of three).

You can also find IMO and IMI at the transponder key computer up behind the instrument cluster. It will be same colors but pins 6 and 7 in a 14 pin plug.



-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.


Print Page | Close Window