Print Page | Close Window

2005 gmc yukon loocks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102321
Printed Date: July 12, 2025 at 4:04 AM


Topic: 2005 gmc yukon loocks

Posted By: addwires
Subject: 2005 gmc yukon loocks
Date Posted: February 18, 2008 at 5:17 PM

I have a 2005 GMC Yukon and I istalled a asian wolf FM2009 V2.0 with an interface module 1700G. firts. i connect the door trigger output but it did'n work, so i connect it to the dome light and it was working fine, but now the door unlock (only) some times work some times not, and some times i have to press the unlock button twice and them unlock the door, just today i so the alarm that is in valet mode, I dont know if the customer was playing with the valet swich or what was the problem but any way, he states that he did not do any thing.

second; when i installed the alarm i did not connect the factory alarm disarm wire and the starter it was working propertly but now when i remote starter the factory alarm gets activated.

Please i need some help Thank you very much



-------------
wilomar



Replies:

Posted By: hydroz_23
Date Posted: February 18, 2008 at 5:36 PM
i would check your connections for the 1700g. the 1700g will do factory alarm arm and disarm so you dont need to hook that up



Posted By: addwires
Date Posted: February 18, 2008 at 6:55 PM

that is what i know, and thi is why  the alarm  was working fine, any way i will recheck the connections thank you.



-------------
wilomar


Print Page | Close Window