07 nissan titan vss wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102394
Printed Date: June 02, 2024 at 10:06 AM

Topic: 07 nissan titan vss wire

Posted By: fool
Subject: 07 nissan titan vss wire
Date Posted: February 21, 2008 at 1:51 AM

I'm trying to locate the VSS signal on a 07 Titan Base model with CD Player only. I have tried a CanBus adapter that plugs into the DataLink. I do not have a volume control at the steering wheel. I could not locate a control unit that Mitchell refers to as the AV switch.

Im installing a Vehicle Identification Unit that tracks vehicle data such as mileage and hours on a City Vehicle.

Any advise?

Replies:

Posted By: jeffwhiteman
Date Posted: February 21, 2008 at 7:20 AM

WHITE/ red behind the instrument panel

Posted By: fool
Date Posted: February 21, 2008 at 9:55 PM

Yes pin 29 at the instrument cluster is suppost to have a wht/red wire for the VSS. The wire is not there, blank space.

This is a base model Titan. Has no extra goodies such as nav, premier radio, compass.

Would Nissan make different wire harness for different models?

Posted By: jeffwhiteman
Date Posted: February 22, 2008 at 8:45 AM

sorry, i dont know, I am sure you know anything is possible, especially if they made the truck on a friday! Do you know what exactly is being monitored by the vss signal, maybe the tach will work instead. If all else fail you can make a signal using magnets and a coil. I have never done this but I am sure someone on this site has done many.

Posted By: flobee4
Date Posted: February 22, 2008 at 9:53 AM

You can try putting a wire in that empty slot and see if there is a speed pulse output, I know thats how it works on the newer Pathfinder. On the newer pathifiner if you have a certain radio the wire leaves there and goes to the radio, if you have the base radio there is no wire in the harness at the cluster. So you just add your own. Try it you got nothing to loose.

Posted By: fool
Date Posted: February 26, 2008 at 6:07 PM

Thanks for the advise, I added a wire to the back of the cluster Pin 29 and got my signal. If the Titan has the premier radio or a compass the wht/red wire would be there.

Thanks again for the quick response.