illuminated entry cm3300
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102400
Printed Date: May 29, 2024 at 2:49 AM
Topic: illuminated entry cm3300
Posted By: mkee
Subject: illuminated entry cm3300
Date Posted: February 21, 2008 at 10:50 AM
I've installed a Compustar CM3300 alarm only system 1WAM-A, everything works except for the illuminated entry light when unlock. Added a relay still not working and no sound from relay clicking, the relay connections are 86 to 12v.+, 85 to alarm trigger (-), 87 to domelight (-), 30 to grd.
I think the module is faulty or do I have program this to make it work?
Thanks in advance
Replies:
Posted By: tedmond
Date Posted: February 21, 2008 at 2:06 PM
you will have to program the output. to make sure its not a relay problem, take the 85 and touch it to ground. that should make the relay click.
Posted By: mkee
Date Posted: February 21, 2008 at 9:57 PM
Yes it works when I touch the connection 85 to ground, the relay clicks and dome light comes on. I bought the alarm from A&B sound I'll go there and ask them.
Posted By: tedmond
Date Posted: February 22, 2008 at 7:21 PM
the unit may be defective or its all programming.
Posted By: mkee
Date Posted: March 07, 2008 at 9:40 PM
Well I went to AB sound about this problem and no help from them, they say they never connect this up. Contacted Staub Electronics and they bench tested the module and found the domelight output is defective. This domelight output does not need programing, it defaults to ON. Now everything works like it should.
|