Print Page | Close Window

programming a 561t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102408
Printed Date: April 26, 2024 at 10:28 PM


Topic: programming a 561t

Posted By: electricd7
Subject: programming a 561t
Date Posted: February 21, 2008 at 2:19 PM

Hello,

I just installed a 561T in a 2005 Dodge Grand Caravan.  All is good.  However, I want to change the run timer and the parking lights to flash instead of steady on.  The manual says that this can be programmed, but it doesn't explain how.   I have the RS setup to activate if it recieves a LOCK pulse 3 times.  Can anyone tell me how to program this puppy?

Thanks!

ED7




Replies:

Posted By: electricd7
Date Posted: February 22, 2008 at 12:46 PM
anyone?



Posted By: swamprat323
Date Posted: February 22, 2008 at 1:04 PM
page 26 of the install guide tells ya how. you use the active input to change it meaning what button on remote you connect it to



Posted By: electricd7
Date Posted: February 22, 2008 at 3:52 PM
Weird..my install guide doesn't even go to 26...it stops at 9 :)  Can someone link me possibly to the real version of the install guide?



Posted By: electricd7
Date Posted: February 22, 2008 at 3:54 PM
found it...nevermind.. Thanks!


Print Page | Close Window