2002 honda odyssey key bypass needed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102458
Printed Date: June 07, 2025 at 9:48 PM

Topic: 2002 honda odyssey key bypass needed

Posted By: nhat179
Subject: 2002 honda odyssey key bypass needed
Date Posted: February 22, 2008 at 9:14 PM

I'm doing a remote starter for my 2002 Odyssey. I got wiring problem with my Bypass. I got a PKH2 ( bypasskit.com ), it shows me the wires i need to connect locate by the key cylinder is:

- Data: Blue/Green

- Synchro: ORANGE / Blue ( i can only found this one )

- Ground: BROWN / Yellow.

What i see by the key cylinder is the plug with 4 wires ( i think that is the wire for transponder ), they are: ORANGE / Blue, Black, Blue, WHITE/ Black ( i think ).

Can anyone help me with this? Thank you

Replies:

Posted By: hydroz_23
Date Posted: February 22, 2008 at 9:33 PM

is it a green 5 pin plug with 4 wires in it?

Posted By: nhat179
Date Posted: February 22, 2008 at 9:35 PM

yes sir, it is. But i cannot find the wire color like the wiring information said. :(

Posted By: hydroz_23
Date Posted: February 22, 2008 at 10:02 PM

i would just double check those wires with plenty of light. sometimes the tracer (the stripe on the wire) will fade making it hard to tell what it really is

Posted By: KarTuneMan
Date Posted: February 22, 2008 at 10:55 PM

ground is next to the empty pin, the next one is syncro, next to that is data. you cant go wrong.

-------------

Posted By: nhat179
Date Posted: February 23, 2008 at 9:09 AM

thanks alot for respond everybody

Posted By: nhat179
Date Posted: February 23, 2008 at 6:43 PM

i connect all the wires, my bypass is XK05 (PKH2 firmware loaded). But after turn the key to ignition, the LED on bypass stay on all the time and vehicle still no bypassed (LED suppose to flash 4 time to tell you that bypass are programmed). Anyone know about this problem? Is this wrong firmware on the XK05? Please help.

Print Page | Close Window