Print Page | Close Window

xk05 pkh2 firmware problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102526
Printed Date: March 29, 2024 at 8:31 AM


Topic: xk05 pkh2 firmware problem

Posted By: nhat179
Subject: xk05 pkh2 firmware problem
Date Posted: February 24, 2008 at 11:27 PM

i'm doing remote starter for 2002 Honda Odyssey. i connect all the wires, my bypass is XK05 (PKH2 firmware loaded). But after turn the key to ignition, the LED on bypass stay on all the time and vehicle still no bypassed (LED suppose to flash 4 time to tell you that bypass are programmed). Anyone know about this problem? Is this wrong firmware on the XK05? Please help.



Replies:

Posted By: Clean Install
Date Posted: February 25, 2008 at 12:16 AM

do u have a UTI availiable ?

just put one in last week.... the uti worked great...



-------------
If we learn from each success and
each failure, then we can improve ourselves




Posted By: brhaugen
Date Posted: February 25, 2008 at 7:21 AM
1)Double check your wiring connections.
2)Reset the unit and try again.
3)If still no-go get the unit replaced - I haven't had any bad ones lately but....




Posted By: nhat179
Date Posted: February 25, 2008 at 7:40 AM
i checked all wiring and reset the unit already, but the LED still keep on solid :(. First time i put it on, the LED flash one time and off, but still not bypass. Then I reset and turn key on, LED keep go on solid.




Posted By: brhaugen
Date Posted: February 25, 2008 at 2:51 PM
I would guess it is a bay bypass - but that is just a guess.




Posted By: snotdobbs
Date Posted: February 25, 2008 at 4:27 PM

are you depressing the programming button on the xk05 while turning  the key?>





Posted By: mxxmikexx
Date Posted: February 25, 2008 at 7:08 PM
call trilogix tech support 877-212-8058
sometimes those xko5 modules just wont work on hondas, i just had an 01 prelude last week that i couldnt get to program either, wound up using a key and a keybox after i wasted time with the xk05.

ive also had situations where the xko5 module wouldnt program on hondas until i tried using a different key. in those situations your screwed if the customer comes in with only one key, or only has one key which is what the scenario was on the prelude mentioned above, customer had to go get a key made at honda.



-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106




Posted By: nhat179
Date Posted: February 25, 2008 at 8:27 PM
snotdobbs wrote:

are you depressing the programming button on the xk05 while turning  the key?>


No i did not, i just leave the bypass in the dash and turn the key on.

So, what do you think i have to do?





Posted By: nhat179
Date Posted: February 25, 2008 at 8:28 PM

mxxmikexx wrote:

call trilogix tech support 877-212-8058
sometimes those xko5 modules just wont work on hondas, i just had an 01 prelude last week that i couldnt get to program either, wound up using a key and a keybox after i wasted time with the xk05.

ive also had situations where the xko5 module wouldnt program on hondas until i tried using a different key. in those situations your screwed if the customer comes in with only one key, or only has one key which is what the scenario was on the prelude mentioned above, customer had to go get a key made at honda.


thanks alot, so the XK05 never work with u :( ????






Print Page | Close Window