03 avalanche
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10261
Printed Date: May 14, 2025 at 5:05 PM
Topic: 03 avalanche
Posted By: mdfauto
Subject: 03 avalanche
Date Posted: March 01, 2003 at 12:38 PM
Intrested in using factory remote to produce three short - pulses to a crimestopper 901 add on.. if its data bus i need to find factory rearm wire for the pulse?
customer wants driver one and two memory and thats the only way i can can think to do it.. any help??
Replies:
Posted By: toyvet1
Date Posted: March 02, 2003 at 9:36 AM
Is the Crimestopper a remote starter that uses the factory romotes? I installed a Design Tech unit in my 03 Avalanche that uses the remote from the factory to trigger the starter. To get the pupse signal I tied into the door lock wiring near the fuse panel at the drivers door. If I remember correctly it is a grey wire in the upper left corner of the fuse block. I trigger the remote lock twice in three seconds to start the truck. I retained all the memory functions of the remotes. Hope this helps..
|