driver’s priority unlock compustar
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102649
Printed Date: June 01, 2024 at 8:37 AM
Topic: driver’s priority unlock compustar
Posted By: talktotravis
Subject: driver’s priority unlock compustar
Date Posted: February 28, 2008 at 11:37 PM
On a Compustar CM4200 when setting up for driver's priority unlock, would you use the blue unlock wire to connect to only the driver's door and the ORANGE / black for the other doors? I just want to clarify before making the connections, and the Compustar manual doesn't say much. If anyone's familiar with Compustar (they use the same lock colors in all of their models).
This is for a 1997 Honda Civic, I've already found those wires and got them ready to go.
Thanks,
Travis
Replies:
Posted By: KarTuneMan
Date Posted: February 29, 2008 at 12:29 AM
blue would be primary unlock, and the ORANGE / black secondary unlock. You got it! -------------
Posted By: mkee
Date Posted: March 01, 2008 at 12:27 AM
I will be installing a 2 wire power door lock actuator on each door and would like to have driver priority unlock. How do I wire this up to each door, would I have to use 2 relays for each door actuators, unlock relay and a lock relay?
Posted By: KarTuneMan
Date Posted: March 01, 2008 at 11:08 AM
1 relay for lock (for both) and 1 relay each for unlock.
-------------
|