2005 altima, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102653
Printed Date: May 14, 2024 at 8:19 PM

Topic: 2005 altima, remote start

Posted By: stx-di
Subject: 2005 altima, remote start
Date Posted: February 29, 2008 at 7:50 AM

What wire on the BCM do I connect the actvation wire for a 561T to?

The car is a 2005 altima with a keyless entry.

Kurt

Replies:

Posted By: Twelvoltz
Date Posted: February 29, 2008 at 10:08 AM

Hook the positive activation wire (WHITE/ red) from the 561T to the yellow/red at the BCM pin 65. This wire will pulse to +12V when locking. I always set the unit to require 3 pulses to activate. This seems to help prevent accidentally starting up the system.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: stx-di
Date Posted: February 29, 2008 at 1:28 PM

Thanks

I was useing the negative puls wire fro the remote start.

Use the positive wire and it works great

kurt

Print Page | Close Window