door lock wiring, 2008 infiniti g35
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102693
Printed Date: November 04, 2025 at 5:50 AM
Topic: door lock wiring, 2008 infiniti g35
Posted By: infiniti2007
Subject: door lock wiring, 2008 infiniti g35
Date Posted: March 01, 2008 at 7:16 PM
Hi, I try to wire the alarm for 2008 infiniti g35. What are color wire for lock and unlock and where exactly they located?. My alarm can hook up the (-) or (+) input for door lock/unlock .Thanks
-------------
hhh
Replies:
Posted By: Chris Luongo
Date Posted: March 01, 2008 at 7:28 PM
www.idatalink.ca or www.ifar.ca
On either site, select your type of car, and then they'll offer products for sale.
At that point, you'll be able to look at the installation manual. (You don't have to buy the product.)
Both companies' manuals show where there are two empty pins at the BCM in the passenger kick panel, and you can insert wires there to control the locks.
Posted By: infiniti2007
Date Posted: March 01, 2008 at 7:33 PM
yes, I tried that already, but after half hour or so . When you disarm vehicle the door will not unlock. Someone told me that the BCM will put to sleep after certain time.
-------------
hhh
Posted By: tedmond
Date Posted: March 01, 2008 at 8:40 PM
double pulse to unlock, single pulse disarms. also i havent heard of the infinity BCM going to sleep, only know of this on GM vehicles.
Posted By: infiniti2007
Date Posted: March 03, 2008 at 8:18 AM
could someone provides me the color wire chart for infiniti 2008 g35 please ? .Thanks
-------------
hhh
Posted By: KPierson
Date Posted: March 03, 2008 at 9:58 AM
I've always 5 wired the Nissan products - I've never been comfortable sticking wires in open pins on the BCM. Lock should be purple at BCM
Drivers unlock should be green at BCM
Passengers unlock should be violet at BCM These are the actual actuator wires and can be metered when locking/unlocking the doors from any source. You wil need a relay for each wire. I know others have had great success with the empty pins, but I just don't personally like it. ------------- Kevin Pierson
Posted By: infiniti2007
Date Posted: March 04, 2008 at 6:42 AM
How do you use relay for these wire?. Are these all positive (+) wire ?. Thanks.
-------------
hhh
Posted By: infiniti2007
Date Posted: March 04, 2008 at 6:54 AM
How do you connect the lock/unlock wire by using the reverse polarity wire on this vehicle?.
-------------
hhh
|